Ahmad, F., Adeel, M., Qui, B., Ma, J., Shoaib, M., Shakoor, A., & Chandio, F. A. (2021). Sowing uniformity of bed-type pneumatic maize planter at various seedbed preparation levels and machine travel speeds. International Journal of Agricultural and Biological Engineering, 14(1), 165-171.
Ahmadi, E., Jaberi Moez, M., & Ahmadvan, G. (2008). Evaluation of various planters on seed rate, emergence, sowing depth and seed distribution uniformity of canola, presented at 5th Conference on agricultural machinery engineering and mechanization, Mashhad University. Mashhad. (In Persian)
Al-Hamed, S. A., Wahby, M. F., Aboukarima, A. M. & Tabash, I. S. (2015). Evaluating a laboratory test-rig for calibration of a grain drill for education purpose. ARPN Journal of Agricultural and Biological Science, 10 (12), 469-475.
Amirian, A., Rezaei Asl, A., & Esmailzadeh, E. (2017). Fabrication and evaluation of pressurized metering drum performance (equipped with a mechanical separator) by grease belt. Iranian Journal of Biosystems Engineering, 48(3), 271-278. (In Persian)
An, X., Wang, S., Duan, H., Yang, C., & Yu, Y. (2017). Test on effect of the operating speed of maize-soybean interplanting seeders on performance of seeder-metering devices. Procedia Engineering, 174, 353-359.
Behroozi Lar, M. (2016). Mechanization, energy and satellite agriculture: The history of agricultural mechanization in the world and Iran. Tehran, Iran: Agricultural education research. (In Persian)
Ding, Y., Yang, L., Zhang, D., Cui, T., Li, Y., Zhong, X., ... & Ding, Z. (2021). Novel low-cost control system for large high-speed corn precision planters. International Journal of Agricultural and Biological Engineering, 14(2), 151-158.
Emrah, K. U. Ş., & Yildirim, Y. (2022). Evaluation of the seed flow uniformity of the fluted feed roller designed for coarse-grained seeds. Kahramanmaraş Sütçü İmam Üniversitesi Tarım ve Doğa Dergisi, 25(3), 550-555.
DOI: 10.18016/ksutarimdoga.vi.883208
Gautam, P. V., Kushwaha, H. L., Kumar, A., & Kushwaha, D. K. (2019). Mechatronics application in precision sowing: A review. International Journal of Current Microbiology and Applied Sciences, 8(4), 1793-1807.
Gierz, Ł., & Markowski, P. (2020). The Effect of the distribution head tilt and diffuser variants on the evenness of sowing rye and oat seeds with a pneumatic seed drill. Materials, 13(13), 3000.
Guler, I. E. (2005). Effects of flute diameter, fluted roll length, and speed on alfalfa seed flow. Applied Engineering in Agriculture, 21(1), 5-7.
Hu, H., Zhou, Z., Wu, W., Yang, W., Li, T., Chang, C., ... & Lei, X. (2021). Distribution characteristics and parameter optimisation of an air-assisted centralised seed-metering device for rapeseed using a CFD-DEM coupled simulation. Biosystems Engineering, 208, 246-259.
Huang, Y., Wang, B., Yao, Y., Ding, S., Zhang, J., & Zhu, R. (2018). Parameter optimization of fluted-roller meter using discrete element method. International Journal of Agricultural and Biological Engineering, 11(6), 65-72.
Iacomi, C., & Popescu, O. (2015). A new concept for seed precision planting. Agriculture and Agricultural Science Procedia, 6, 38-43.
Jafari, M., Hemmat, A., & Sadeghi, M. (2011). Comparison of coefficient of variation with non-uniformity coefficient in evaluation of grain drills. Journal of Agricultural Science and Technology, 13, 643-654.
Kara, M., Bayhan, A. K., Ozsert, I., & Yildirim, Y. (2010). Performance of fluted roll metering devices in seed drills with ammonium sulphate and diammonium phosphate. Applied Engineering in Agriculture, 26(2), 197-201.
Lei, X., Hu, H., Wu, W., Liu, H., Liu, L., Yang, W., ... & Ren, W. (2021). Seed motion characteristics and seeding performance of a centralised seed metering system for rapeseed investigated by DEM simulation and bench testing. Biosystems Engineering, 203, 22-33.
Lei, X., Liao, Y., Zhang, Q., Wang, L., & Liao, Q. (2018). Numerical simulation of seed motion characteristics of distribution head for rapeseed and wheat. Computers and Electronics in Agriculture, 150, 98-109.
Li, B., Ahmad, R., Qi, X., Li, H., Nyambura, S. M., Wang, J., ... & Li, S. (2021). Design evaluation and performance analysis of a double-row pneumatic precision metering device for brassica chinensis. Sustainability, 13(3), 1374.
Maleki, M. R., Jafari, J. F., Raufat, M. H., Mouazen, A. M., & De Baerdemaeker, J. (2006). Evaluation of seed distribution uniformity of a multi-flight auger as a grain drill metering device. Biosystems Engineering, 94(4), 535-543.
Mohammad-Ghasemnejad Maleki, H. (2019). Filed evaluation of mechanized cultivation planters of rapeseed in Shoushtar region. Journal of Plant Production Sciences, 8(2), 183-196. (In Persian)
Minfeng, J., Yongqian, D., Hongfeng, Y., Haitao, L., Yizhuo, J., & Xiuqing, F. (2018). Optimal structure design and performance tests of seed metering device with fluted rollers for precision wheat seeding machine. IFAC-PapersOnLine, 51(17), 509-514.
Murray, J. R., Tullberg, J. N., & Basnet, B. B. (2006). Planters and their components: Types, attributes, functional requirements, classification and description. Australia: ACIAR.
Owen, M. D., Beckie, H. J., Leeson, J. Y., Norsworthy, J. K., & Steckel, L. E. (2015). Integrated pest management and weed management in the United States and Canada. Pest Management Science, 71(3), 357-376.
Ozturk, I., Yildirim, Y., Hinislioglu, S., Demir, B., & Kus, E. (2012). Optimization of seed flow evenness of fluted rolls used in seed drills by Taguchi method. Scientific Research and Essays, 7(1), 78-85.
Rebati, J., & Zareian, S. (2003). Design construction and laboratory evaluation of a roller type metering device for hill dropping. Journal of Agricultural Science, 13(4), 75-86.
Wang, C., Li, H., He, J., Wang, Q., Lu, C., & Yang, H. (2022). Optimization design of a pneumatic wheat-shooting device based on numerical simulation and field test in rice–wheat rotation areas. Agriculture, 12(1), 1-13.
Wu, W., Chang, C., Li, T., Hu, H., Zhou, Z., Yang, W., ... & Lei, X. (2022). Seed-filling characteristics of a centralized seed-metering device for rapeseed caused by vibration. Agriculture, 12(7), 965.
Xi, X., Gao, W., Gu, C., Shi, Y., Han, L., Zhang, Y., ... & Zhang, R. (2021). Optimisation of no-tube seeding and its application in rice planting. Biosystems Engineering, 210, 115-128.
Xi, X., Gu, C., Shi, Y., Zhao, Y., Zhang, Y., Zhang, Q., ... & Zhang, R. (2020). Design and experiment of no-tube seeder for wheat sowing. Soil and Tillage Research, 204, 104724.
Xiong, D., Wu, M., Xie, W., Liu, R., & Luo, H. (2021). Design and experimental study of the general mechanical pneumatic combined seed metering device. Applied Sciences, 11(16), 7223.
Yasir, S. H., Liao, Q., Yu, J., & He, D. (2012). Design and test of a pneumatic precision metering device for wheat. Agricultural Engineering International: CIGR Journal, 14(1), 16-25.
Yatskul, A., Lemiere, J. P., & Cointault, F. (2017). Influence of the divider head functioning conditions and geometry on the seed's distribution accuracy of the air-seeder. Biosystems Engineering, 161, 120-134.
Yitao, L., Lei, W., & Qingxi, L. (2017). Design and test of an inside-filling pneumatic precision centralized seed-metering device for rapeseed. International Journal of Agricultural and Biological Engineering, 10(2), 56-62.
)