Amer Eissa, A. H., Gomaa, A. H., Baiomy, M. H., & Ibrahim, A. A. (2008). Physical and mechanical characteristics for some agricultural residues. Journal of Agricultural Engineering., 25, 121-146.
ASAE. (2005). Moisture relationships of plant-based agricultural products. St. Joseph, Mich: ASAE.
Boydas, M. G., Comakli, M., Sayinci, B., & Kara, M. (2019). Effects of moisture content, internode region, and oblique angle on the mechanical properties of sainfoin stem. Turkish Journal of Agriculture and Forestry, 43, 254-263.
Bright, R. W., & Kleis, R. W. (1964). Mass shear strength of haylage. Transaction of the ASAE, 7, 100-101.
Chancellor, W. J. (1958). Energy requirement for cutting forage. Journal of Agricultural Engineering Research, 39, 633-639.
Chandio, F. A., Yi, C., Tagar, A. A., Mari, I. A., Arslan, C., Cuong, D. M., & Fang, H. (2013). Effect of loading rate on mechanical characteristics of wheat and rice straw. Bulgarian Journal of Agricultural Science., 19, 1452-1458.
Chattopadhyay, P. S., & Pandey, K. P. (1999). Mechanical properties of sorghum stalk in relation to quasi-static deformation. Journal of Agricultural Engineering Research, 73, 199-206.
Crook, M. J., & Ennos, A. R. (1996). Mechanical differences between free-standing and supported wheat plants. Annals of Botany 77, 197-202.
Curtis, L. M., & Hendrick, J. G. (1969). A study of bending-strength properties of cotton stalks. Transactions of the ASAE, 12 (6), 39-45.
Dongdong, D., & Jun, W. (2016). Research on mechanics properties of crop stalks: A review. International Journal of Agricultural & Biological Engineering, 9, 10-19.
Esehaghbeygi, A., Hoseinzadeh, B., Khazae, M., & Masoumi, A. (2009). Bending and shearing properties of wheat of alvand variety. World Applied Sciences Journal, 6, 1028-1032.
Gere, J. M., & Timoshenko, S. P. (2004). Mechanics of materials. Belmont CA, USA: Thomson Learning Inc.
Hoseinzadeh, B., & Shirneshan, A. (2012). Bending and shearing characteristics of canola stem. American-Eurasian Journal of Agricultural and Environmental Sciences, 12, 275-281.
Ince, A., Ugurluay, S., Guzel, E., & Ozcan, M. T. (2005). Bending and shearing characteristics of sunflower stalk residue. Biosystems Engineering, 92, 175-181.
Kaack, K., & Schwarz, K. (2001). Morphological and mechanical properties of Miscanthus in relation to harvesting, lodging, and growth conditions. Industrial Crops and Products, 14, 145-154.
Kamandar, M., & Massah, J. (2017). Sensor based definition of buxus stem shearing behavior in impact cutting process. Agricultural Engineering International: The CIGR Ejournal, 19, 29-36.
Kanafojiski, C. Z., & Karwowski, T. (1972). Agricultural machines, theory and construction. USA: U.S. Department of Commerce, National Technical Information Service.
O'Dogherty, M. J., Hubert, J. A., Dyson, J., & Marshall, C. J. (1995). A study of the physical and mechanical properties of wheat straw. Journal of Agricultural Engineering Research, 62, 133-142.
Persson, S. (1987). Mechanics of cutting plant material (1st ed.). USA: American Society of Agricultural Engineers.
Schulze, K. H. (1953). Uber den schneidvorgang an grashalmen [on the cutting process for grass stems]. Grundlagen der Landtechnik, 5, 98-116.
Shahbazi, F., & Nazari Galedar, M. (2012). Bending and shearing properties of safflower stalk. Journal of Agricultural Science and Technology, 14, 743-754.
Shaw, M. D., & Tabil, L. G. (2007). Compression, relaxation and adhesion properties of selected biomass grinds. Agricultural Engineering International, the CIGR Ejournal. Manuscript, FP 07006 IX.
Sitkei, G. (1986).
Mechanics of agricultural materials (1
st ed.).
Amsterdam,
Netherlands: Elsevier Science Publishers.
Skubisz, G. (2001). Development of studies on the mechanical properties of winter rape stems. International Agrophysics, 15, 197-200.
Srivastava, A. K. (2005). Engineering principles of agricultural machines (2nd ed.). USA: American Society of Agricultural Engineers.
Tavakoli, H., Mohtasebi, S. S., & Jafari, A. (2009). Effect of moisture content and loading rate on the shearing characteristics of barley straw by internode position.
Agricultural Engineering International: The CIGR Ejournal, Manuscript 1176. Vol. XI. Retrieved from
https://cigrjournal.org/index.php/Ejounral/article/view/1176/1168. pdf
Wen, B., Li, Y., Kan, Z., Li, J., Li, L., Ge, J., Ding, L., Wang, K., Zou, S., & Li, W. (2020). Experimental research on the bending characteristics of Glycyrrhiza glabra stems. Transactions of the American Society of Agricultural and Biological Engineers, 63, 1499-1506.
)