@article { author = {Zarei, Abdol Rassoul and Amiri, M.J.}, title = {Evaluation of soil losses and sediment yield using modified PSIAC model}, journal = {Iran Agricultural Research}, volume = {36}, number = {1}, pages = {111-116}, year = {2022}, publisher = {Shiraz University}, issn = {1013-9885}, eissn = {2717-1582}, doi = {10.22099/iar.2017.4035}, abstract = {ABSTRACT- One of the big problems today human societies are faced with is the problem of soil erosion. In this study, the "MPSIAC model" was used to estimate sediment yield and provide sediment yield map in Cachoyeh watershed. The MPSIAC method incorporates nine environmental factors that contribute to sediment yield of the watershed. These factors are: surface geology, soil, climate, runoff, topography, ground cover, land use, channel and surface erosion. ArcGIS 10.2 software was used to prepare the map of each factor and analyze them to create the sediment yield map and erosion map. According to the results based on MPSIAC model, 94.2 % (476.1km2) of study area was classified in the slight sedimentation and 29.2 % (147.5 km2) of it was classified in the moderate erosion classes. The total sediment yield of basin was calculated as 1236.5 (m3 km−2 year−1) and the total of erosion was calculated as 5091.6 (m3 km−2 year−1). The sensitivity analysis of parameters of MPSIAC model showed that the most sensitive parameters of the model based on their importance were: channel erosion, land cover and geology with Pearson correlation of 0.75 to 0.36. Land use factor was found to have a lower effect than the output model.}, keywords = {Keywords:,MPSIAC model,Sediment yield,Erosion,SDR,GIS}, title_fa = {ارزیابی تخریب خاک و تولید رسوب با استفاده از مدل اصلاح شده}, abstract_fa = {چکیده-یکی از مسائل بزرگی که امروزه جوامع بشری را تحت تاثیر قرار داده است بحث فرسایش خاک می باشد. دراین مطالعه با استفاده از مدل PSIAC  اصلاح شده ((MPSIAC اقدام به بررسی و تخمین میزان رسوب زایی و همچنین تهیه نقشه رسوب زایی در حوضه آبخیز کچویه گردید. مدل MPSIAC شامل 9 فاکتور زیست محیطی است که به کمک آنها اقدام به تخمین میزان تولید رسوب در حوضه های آبخیز می گردد این فاکتور ها عبارتند از : زمین شناسی، خاک، اقلیم ، روان آب، توپوگرافی، پوشش سطح زمین، کاربری اراضی، فرسایش شیاری و فرسایش سطحی. در این مطالعه به منظور ارزیابی فاکتور ها و تهیه نقشه های فرسایش و رسوب زایی از نرم افزار ArcGIS 10.2 استفاده شد. نتایج بدست آمده برمبنای مدل MPSIAC نشان داد که 2/94 درصد از مساحت منطقه مورد بررسی (1/476 کیلو متر مربع) در کلاس رسوب زایی کم قرار دارند و  2/29 درصد از مساحت منطقه مورد بررسی  (5/147 کیلو متر مربع) در کلاس فرسایش متوسط قرار دارند. بر این اساس کل رسوب زایی و فرسایش  برآورد شده در حوضه به ترتیب معادل 5/1236 و 6/5091 مترمکعب در کیلو متر مربع در سال محاسبه گردید. آنالیز حساسیت پارامتر های مدل MPSIAC نشان داد که شاخص های فرسایش کانالی، پوشش سطح زمین و زمین شناسی با ضریب همبستگی 75/0 تا 36/0 (روش پیرسون) با میزان فرسایش به ترتیب حساس ترین پارامتر ها و شاخص کاربری اراضی با کمترین همبستگی کم حساسیت ترین پارامتر در مدل مورد استفاده هستند.}, keywords_fa = {واژه های کلیدی:,مدل MPSIAC,تولید رسوب,فرسایش,SDR,GIS}, url = {https://iar.shirazu.ac.ir/article_4035.html}, eprint = {https://iar.shirazu.ac.ir/article_4035_68ae382ce037d41e204a1668b91c7a82.pdf} }